24" EMAG, 5 AXIS VERTICAL TURNING AND MILLING CENTER, VMC 450-5MT; UNUSED
Brand
EMAG
Model
VMC 450-5MT
Type
Lathes, Vertical, CNC
Stock #
20540
Condition
Not specified
Year
2021
Location
Houston, Texas
United States
Specifications
| Chuck Dia. | 24 inches |
| Capacity | 1100 pounds |
| Max Swing Diameter | 31 inches |
| Turning Diameter | 23.5 inches |
| X-Axis Travel (Upper/Lower) | 30 inches |
| Z-Axis Travel (Upper/Lower) | 19 inches |
| Drive Power | 100 HP (full power at 800 RPM) |
| Max Spindle Speed (RPM) | 2000 RPM |
| Z-Axis Rapid Traverse Rate | 60/30 M/Min. |
| Feed Force X / Z | 4 / 15 kN |
| Ball Screw Diameter X / Z | 40 / 50 MM |
| Milling Spindle Motor | 100 HP |
| Max Milling Spindle Speed (RPM) | 7000 RPM |
| Milling Spindle Taper | CAPTO C8 |
| Tool Changer Capacity | 60 |
Equipped With
CHUCK DIAMETER: 24"
MAX WEIGHT: 1100 LBS.
MAX SWING DIAMETER: 31"
MAX TURNING DIAMETER: 23.5"
X STROKE: 30"
Z STROKE: 19"
MAIN DRIVE:
POWER: 100 HP
FULL POWER AT 800 RPM
MAX SPINDLE RPM: 2,000
C AXIS POSITIONIONG TO .01MM ANGULAR DEGREES
FEED DRIVE:
RAPIDS Z / Z: 60 / 30 M / MIN.
FEED FORCE X / Z 4 / 15 kN
BALL SCREW DIAMETER X / Z: 40 / 50 MM
MILLING SPINDLE:
POWER: 100 HP
MAX SPINDLE SPEED: 7000 RPM
SPINDLE TAPER: CAPTO C8
TOOL MAGAZINE: 60
EQUIPPED WITH:
MINERALIT MACHINE BED
SIEMENS 840 Dsl
FULL ENCLOSURE
LEVEL PADS
TURN MILL DRIVE
EMAG WORKPIECE CORRECTION SYSTEM
EMAG OPERATING AND SETTINGS MASKS
EMAG REMOTE DIAGNOSIS
Y AXIS
B AXIS +/- 95 DEGREE
1000 PSI COOLANT THROUGH TOOL
X-AXI CLAMPING FOR GEAR TOOTH FORMING
SWARF CONVEYOR, CHAIN TYPE - REAR DISCHARGE
LIFTING PUMP
PAPER FILTER
LOW PRESSURE COOLANT
HIGHT PRESSURE COOLANT 1000 PSI
PROGRAMMABLE COOLANT PRESSURE
COOLANT MIST EXTRACTOR
AIR BLAST
CHIP FLUSH
QUALITY CONTROL:
WIRELESS GAUGING
CALIBRATION BLK FOR PROBE
TOOL GAUGING - BLUM LASER
MAX WEIGHT: 1100 LBS.
MAX SWING DIAMETER: 31"
MAX TURNING DIAMETER: 23.5"
X STROKE: 30"
Z STROKE: 19"
MAIN DRIVE:
POWER: 100 HP
FULL POWER AT 800 RPM
MAX SPINDLE RPM: 2,000
C AXIS POSITIONIONG TO .01MM ANGULAR DEGREES
FEED DRIVE:
RAPIDS Z / Z: 60 / 30 M / MIN.
FEED FORCE X / Z 4 / 15 kN
BALL SCREW DIAMETER X / Z: 40 / 50 MM
MILLING SPINDLE:
POWER: 100 HP
MAX SPINDLE SPEED: 7000 RPM
SPINDLE TAPER: CAPTO C8
TOOL MAGAZINE: 60
EQUIPPED WITH:
MINERALIT MACHINE BED
SIEMENS 840 Dsl
FULL ENCLOSURE
LEVEL PADS
TURN MILL DRIVE
EMAG WORKPIECE CORRECTION SYSTEM
EMAG OPERATING AND SETTINGS MASKS
EMAG REMOTE DIAGNOSIS
Y AXIS
B AXIS +/- 95 DEGREE
1000 PSI COOLANT THROUGH TOOL
X-AXI CLAMPING FOR GEAR TOOTH FORMING
SWARF CONVEYOR, CHAIN TYPE - REAR DISCHARGE
LIFTING PUMP
PAPER FILTER
LOW PRESSURE COOLANT
HIGHT PRESSURE COOLANT 1000 PSI
PROGRAMMABLE COOLANT PRESSURE
COOLANT MIST EXTRACTOR
AIR BLAST
CHIP FLUSH
QUALITY CONTROL:
WIRELESS GAUGING
CALIBRATION BLK FOR PROBE
TOOL GAUGING - BLUM LASER